Walksnail Avatar HD Kit V2 20x20 / 25x25 VTX Kit w/ Micro Camera V2 - (Dual Antenna Version)
- Low stock - 20 items left
- Inventory on the way
Introducing the Walksnail Avatar HD Kit V2 (Dual Antenna Version)! This kit offers improved VTX with a new higher quality casing and is equipped with 20mm x 20mm and 25mm x 25mm mounting holes, allowing compatibility with a vast array of FPV drone models. The PCB board and shell design is more advanced, and the antenna-optimized installation place offers greater protection to the VTX. Dual antennas provide more stable and powerful signals. Using H.265 encoding for industry-leading 1080p images with low latency. Camera V2 delivers 2K pixels, a 4:3 native sensor for enhanced visuals, and a native 4:3 mode ratio so you can capture more of your surroundings in stunning detail. This kit includes the new VTX and camera, coming with 2 antennas.
Features
- Dual antennas
- Compatible 4K
- 1080P 120fps compatibility
- 22ms low latency
- Ranging Mode
- 4KM range
- Lightweight design
- FOV160°
- Built-in 32G storage,
- Support Gyroflow
- 6V-25.2V
- The only native 4:3 high-definition sensor in the FPV industry
- The Avatar HD system uses H.265 code, an industry-leading technology, to provide 1080p FPV image quality with low latency.
- Camera V2 with 2K pixels, 4:3 native sensor for better image quality and native 4:3 mode image ratio allows you to capture more of the surrounding scenery while flying the drone, resulting in more comprehensive and visually appealing images. Meanwhile, it's a better fit for regular FPV races as well.
- The camera ( 32G VTX KIT) supports Gyroflow, take you a smooth and stable video quality.
- The kit includes 20mm x 20mm and 25mm x 25mm mounting holes for greater compatibility with a wider range of FPV drone models.
- Updated the design of PCB board and shell, improved the quality of VTX, more durable.
- Optimized the installation place of the antenna, so as to better protect the VTX.
- The position of the frequency binding button has been changed to make the frequency binding operation more convenient.
- A spare pad is added to provide two power connection modes.
- New VTX with enhanced TVS protection and support for up to 6S. With a wide input voltage the range of 6V to 25.2V, our VTX delivers unmatched stability. Enjoy unparalleled performance and take your FPV adventures to new heights with our cutting-edge technology.
- Supports both high frame rate and standard frame rate, it has an average latency of 22ms with the high frame rate.
- Designed to carry dual antennas to achieve more stable and powerful signals. The quality of the antenna is upgraded, and the working performance of the whole frequency band is more stable.
Specification
Camera
- Model: Avatar V2 camera
- Image Sensor: 1/3.2-Inch 4Mp 4:3sensor
- Resolution: 1080P/60fps; 720P/100fps; 720P/60fps;1080P/120fps compatibility;
- 1080P/100fps compatibility;
- Ratio: 4:3 native /16:9
- Lens: 2.1mm
- FOV: 160°
- Aperture: F2.0
- Shutter: Rolling shutter
- Min.Illumination: 0.001Lux
- Weight: 7.2g
- Dimensions: 19x19x22mm
- Coaxial Cable: 140mm
- Gyroflow: Only 32G VTX Supported
- Model: Avatar V2 module(Dual Antenna)
- Communication Frequency: 725-5.850GHz
- Transmitter Power (EIRP): FCC:<30dBm;CE:<14dBm;SRRC:<20dBm; MIC:<25dBm
- 1/O Interface: JST1.0x4(Power in)JST0.8x6(USB)
- Mounting Holes: 25.5x25.5mm; 20x20mm
- Dimensions: 33.5x33.5x10.5mm
- Storage: 32G
- Recording: 1080p/720p
- Weight: 15.4g
- Operating Temperature: -20-40℃
- Channels: 8
- Wide Power Input: 6V-25.2V
- Supported FC System: Betaflight; Inav; Fettec; ArduPilot; Kiss
- OSD: Canvas mode
- Latency: Average delay 22ms
- Antenna: 2(IPEX)
- Polarization: LHCP
- Bandwidth: 5600MHz-6000MHz
- Gain: 1.9dBi
- VSWR: ≤1.5
- Input Impedance: 50Ω
- Interface: IPEX-1
- Size: R15 X 45mm (without cable)
- Weight: 2g
Includes
- 1x Walksnail Avatar HD Kit V2 20x20 / 25x25 VTX Kit w/ Micro Camera V2 - (Dual Antenna Version)
- 1x USB transfer extension cable
- 1x 4 Pin silicone cable
- 8x M2x4mm screws
- 4x M2x5mm screws
- 4x M2x6mm screws
- 4x M2x14mm screws
- 4x M2x5x0.5mm gasket