iFlight Blitz ATF435 E55S 2-6S 30x30 Stack/Combo (ATF435 FC/ 55A 8Bit 4in1 ESC)

To configure download ATBetaflight and if that does not automatically connect, here are virtual com port drivers.  Future versions of Betaflight will fully support these boards.

Specifications

iFlight Blitz ATF435

• MCU: AT32F435CGU7
  
• Gyro: BMI270
  
• Barometer: DPS310
  
• OSD Chip: AT7456E
  
• Flash: 32MB (Blackbox flash)
• UARTS: 6
  
• Motor outputs: 4x (SH1.0 connector)
  
• I2C serial: SDA / SLA pads
  
• Smartaudio / IRC Tramp VTX protocol supported
  
• LED controller: Yes
  
• Beeper pad: Yes
  
• Firmware target: IFLIGHT_BLITZ_ATF435
  
• Mount pattern: 30.5x30.5mm / 4mm PCB hole diameter
  
• Dimensions: 36.5x35 mm
  
• Weight: 7.8g
  
• BEC: 5V 2.5A / 9V 2A

Blitz E55S ESC

• Mounting Holes: 30.5x30.5mm/Φ4mm
  
• Weight: 14.7g
  
• Supports 2-6S lipo input
  
• MCU: G071
  
• Constant: 55 Amps
  
• Burst: 65 Amp
  
• Current sensor: Yes
  
• BEC: No
  
• Current rate: 200
  
• Supports: DShot DShot150/300/600/MultiShot/ OneShot etc.
  
• Target: Q-H-25 16.7(BlheliS) / Bluejay Q-H-50 (Bluejay)
  

Include

• 1x iFlight Blitz ATF435 E55S 2-6S 30x30 Stack/Combo (ATF435 FC/ 55A 8Bit 4in1 ESC)