Happymodel BNF Mobula6 HDZero V3 1S 65mm Whoop - ELRS 2.4GHz

The Happymodel Mobula 6 HDZero 1S Whoop is the very first 65mm HD brushless whoop in the world, weighing less than 23.5 grams! The Mobula6 is a smooth and agile brushless drone that comes with the HDZero Nano Lite Camera, EX0802 KV19000 Motors, and many other cool features and specs that make this whoop a must-have! Happymodel has teamed up with HDZero, Runcam, Nick Burns, Mr. Shutterbug, Ryan Quellet, and many other enthusiasts to here to make the dream come true! This whoop comes with Built-In ELRS V3!

Note: Batteries are not included.

UART ELRS V3.0 ready
Battery Plug: GNB A30
Onboard black box ready

Default factory dump file:

dump file for Mobula6 HDZERO 1S 65mm digital HD brushless whoop V3

Specifications

Flight controller SuperX HD ELRS

• Betaflight 4.4.2 firmware ready
• Firmware target: CRAZYBEEF4DX
• MCU:STM32F411CEU6 (100MHz, 512K FLASH)
• Sensor: BMI270 or ICM42688P (SPI connection)
• Power supply: 1-2S Lipo Lihv battery input (DC 2.8V~8.7V), only support 1s input for this drone
• Built-in 12A(each) Blheli_S 4in1 ESC Dshot300 read
• Built-in UART elrs receiver , elrs v3.0 ready, support WIFI and pass-through firmware update
• Bluejay ESC Firmware ready
• Built-in 5V 1A BEC
• Built-in voltage detection
• No betaflight analog osd chip

Onboard 4in1 ESC

• Power supply: 1-2S LiPo/LiPo HV
• Current: 12A continuous peak 15A (3 seconds)
• Support ESC-Configurator and BLHELI_S Suite configurator
• Factory firmware: Z-H-30 – Bluejay, 0.19, 48kHz
• Default protocol: DSHOT300

Onboard UART ExpressLRS 2.4GHz Receiver

• RF Frequency: 2.4GHz
• Antenna: enameled copper wire 31mm length
• Telemetry output Power: <12dBm
• Receiver protocol: CRSF
• Default firmware version: ExpressLRS V3.0.1
• The same hardware with Happymodel EP1 receiver
• Could update firmware via ExpressLRS configurator or WIFI or Betaflight pass-through

Motor

• Mode: EX0802 19000KV
• Configu-ration:9N12P
• Stator Diamter:8mm
• Stator Length:2mm
• Shaft Diameter:Φ1mm
• Motor Dimension(Dia.xLen):Φ10.5mmx14.9mm
• Weight(g):1.7g
• No.of Cells(Lipo):1S only

Propeller Gemfan 1219 Bi-blades

• Weight:0.19g
• Material: PC
• Pitch:1 inchProps Dia:30mm
• Center Hole Dia:1mm

HDZero Nano Lite Camera

• 14x16x11 mm
• 1.5gram
• 0.5 inch, up to 10650 mV/Lux-sec ultra-high sensitive CMos sensor
• Excellent low light performance
• Fov:
• 4:3: D:130° H:108° v:84°
• 16:9:D:122° H:108° V:65°

HDZero Whoop Lite VTX

• 1S Input
• 25mW/200mW RF Output-SmartAudio Support
• 25.5×25.5 M2 Soft Mounting- Antenna Retention
• Removable Shielding Box- 32.5×32.5mm(29x29mm inner)
• 4.5grams/4mm Thickness (without shielding)

Links

• ELRS Mobula6 HDZero Manual

Includes

• 1x Happymodel Mobula6 HDZero 1S Whoop
• 1x Gemfan 1210 31mm Propeller (Set of 4)
• 1x Propeller disassemble tool
• 1x Spare Canopy
• 1x Screwdriver