Nutria Frame Kit - Choose 5" or 7" arms
As fellow pilots, we at Armattan Quads are thrilled and honored to release our Nutria into the wild for every FPV pilot in the world to love and enjoy just as much as we have during testing!
We guarantee that your new Armattan Quads Nutria is the toughest and most rigid frame we have ever made, and at the same time the most unyielding 5" or 7" FPV frame EVER made ... all while feeling so very precisely balanced and locked in on the sticks.
It's like magic, but it's not ... it's engineering, lots of experience, and real-world testing from various pilots of various FPV disciplines ... and then you guessed it ... more engineering. Being the most experienced FPV frame manufacturer in the industry since 2012 has its perks. 😉
The groundbreaking arm interlock system is the key to the heart within your Nutria's strength, making tuning easier for those that love to chase a perfect tune, but also often more unnecessary than ever before for those that just want to fly.
All of these attributes, and many more, are by design ... For Pilots, By Pilots.
Much time and effort was invested into assuring that the Nutria makes a SPLASH in the FPV community for many years to come, that our first new frame since our move to the USA, in Armattan Quads fashion, once again raises the bar of what FPV pilots should expect in a premium FPV frame kit.
Development of the Nutria began months before Armattan was officially able to call Roseburg, Oregon, USA its new home in the summer of 2023, and has gone through many iterations since then before we could set it free, all culminating into this masterpiece, our new flagship, the Nutria, available in both 5" and 7" arm configurations.
The Nutria looks SO GOOD in both 5" and 7" making it difficult to choose! Why not both?
All four arms on a bare frame can be changed out quickly with very little effort or rush in less than a minute, and even much faster with intent and a couple practice runs.
Either grab a spare set of arms in a different size for an easy swap, or grab a spare frame. EVERY single part on a 5" and 7" Nutria is interchangeable. The arms are the only difference.
Lastly, it is very unlikely that you'll ever need to use the included Legacy Lifetime Warranty that covers your Nutria from head to toe, but if you ever do somehow manage to break it, then we've got you covered ... for life, forever.
Happy Flying!!
SPECIFICATIONS:
Camera Cage Material: Titanium, mirror polish, clear anodized
Tail Post Material: Aluminum, mirror polish, clear anodized
Camera Brace Material: Aluminum, matte finish, dark silver anodized
Weight: 176 grams (5"), 186 grams (7")
Motor to Motor: 238 mm (5"), 290 mm (7")
Motor Mounting: 16x16 or 19x19. 5 mm thick arms
Stack Mounting (Front): 30x30 (remove standoffs) or 20x20
Stack Mounting (Center): 30x30, 25.5x25.5, or 20x20
Stack/VTX Mounting (Rear): 25.5x25.5 or 20x20
Stack/VTX Mounting (Top Plate Rear): 25.5x25.5
VTX Antenna Mounting: Rear Tail Posts can be flipped up or down, as needed
Stack Height: 25 mm
Camera Mounting: 19 mm to 22 mm, use M2 Nylon Washers (HW039) or O-Rings to dampen and/or mount cameras 20 mm or less
Prop Clearance: 5.5 inches (5"), 7.25 inches (7")
Bottom Plate Thickness: 3 mm
Main Center Plate Thickness: 4mm
Top Plate Thickness: 4mm
Cam Cage Plate Thickness: 2mm
