HAPPYMODEL MOBULA6 2024 1S 65MM ELRS 2.4GHZ OPENVTX 400MW ULTRA LIGHT MICRO FPV WHOOP - BNF
HAPPYMODEL MOBULA6 2024 1S 65MM ELRS 2.4GHZ OPENVTX 400MW ULTRA LIGHT MICRO FPV WHOOP - BNF
HAPPYMODEL MOBULA6 2024 1S 65MM ELRS 2.4GHZ OPENVTX 400MW ULTRA LIGHT MICRO FPV WHOOP - BNF
HAPPYMODEL MOBULA6 2024 1S 65MM ELRS 2.4GHZ OPENVTX 400MW ULTRA LIGHT MICRO FPV WHOOP - BNF

HAPPYMODEL MOBULA6 2024 1S 65MM ELRS 2.4GHZ OPENVTX 400MW ULTRA LIGHT MICRO FPV WHOOP - BNF

Regular price$114.99
/

  • In stock, ready to ship
  • Inventory on the way

The Happymodel Mobula6 2024 1S 65mm Ultra Light Micro FPV Whoop comes equipped with a lightweight AIO flight controller and Serial ELRS receiver, as well as a 5.8G OpenVTX for optimal performance. With super light brushless motors, specifically SE0702 weighing only 1.46 grams, this product offers smooth and powerful flight capabilities. The FX17-B 1/3 CMOS 800TVL camera captures awesome footage, making it perfect for those looking for a professional and informative FPV experience. Compatible with both 1S lipo and LIHV batteries.

 

SPECIFICATIONS:

  • Brand Name: Happymodel
  • Item Name: Mobula6 2024 1S 65mm ultra light micro FPV Whoop
  • Wheelbase: 65mm
  • Size: 81mm*81mm*37mm
  • Weight: 17.7g

Motor:

  • Mode: SE0702 KV28000
  • Configu-ration:9N12P
  • Stator Diamter:7mm
  • Stator Length:2mm
  • Shaft Diameter:Φ1mm
  • Motor Dimension(Dia.*Len):Φ9.5mm*14mm
  • Weight(g):1.46g
  • No.of Cells(Lipo):1S only


Propellers:

  • Materials: PC
  • Inch: 31mm
  • Pitch: 0.8 in
  • Weight: 0.21g
  • Mount hole diameter: 1mm


Flight controller:

  • SuperX ELRS AIO 5-IN-1 Flight controller
  • MCU:STM32F411CEU6 (100MHZ, 512K FLASH) ,ESP32-PICO-D4
  • Sensor:BMI270(SPI connection)
  • Mount hole size: 25.5mm*25.5mm
  • Power supply: 1S battery input (DC 2.9V-4.35V)
  • Built-in 5A(each) Blheli_S 4in1 ESC
  • Built-in Betaflight OSD(SPI Control)
  • Built-in 5.8G OpenVTX 0mw~400mw (MSP control)
  • Built-in UART ExpressLRS v3.0.0
  • Built-in voltage meter sensor, voltage meter scale 110
  • Built-in current meter sensor, current meter scale 1175


Onboard 4in1 ESC:

  • Power supply: 1S LiPo/LiPo HV
  • Current: 5A continuous peak 6A (3 seconds)
  • Support BLHeliSuite programmable
  • Factory firmware: Bluejay v0.19.2
  • Default protocol: DSHOT300
  • Recommend ESC Startup power value to min1100/max1200


Onboard Serial ExpressLRS receiver:

  • Packet Rate option: 50Hz/150Hz/250Hz/500Hz
  • ExpressLRS Firmware version: V3.0
  • RF Frequency: 2.4GHz
  • Antenna : Enameled copper wire antenna
  • Telemetry output Power: <12dBm
  • Receiver protocol: Serial_based CRSF
  • Compatible with ExpressLRS V3.x.x TX Module
  • Could flash single ELRS receiver firmware by Wifi
  • ExpressLRS firmware target: Generic ESP32 2.4Ghz RX and VTX


Onboard 5.8g VTX:

  • Firmware version: OPENVTX
  • MSP VTX
  • PIT Mode support
  • Channels:40ch
  • Transmitting Power: 0/RCE/25mw/100mw/400mw
  • Power supply: DC 5V
  • Current (5v): <650ma (400mw)
  • Antenna connector: U.FL


FX17-B Camera:

  • Model:FX17-B
  • Image Sensor: 1/3″ CMOS
  • Horizontal Resolution: 800TVL
  • FOV 150°
  • Signal System: NTSC
  • Net Weight: 1.5g
  • Dimensions: L14mm*W14mm*H13mm

 

PACKAGE INCLUDES:

  • 1x Mobula6 2024 1S 65mm whoop Drone Frame +Canopy
  • 1x SuperX ELRS AIO 5-IN-1 Flight controller
  • 4x SE0702 KV28000 brushless motor
  • 1x Gemfan 1208-3 31mm tri-blade propellers(4cw+4ccw)
  • 1x FX17-B 1/3 CMOS 800TVL camera NTSC 4:3
  • 1x Onboard 5.8G 25mw~400mw VTX
  • 1x Spare canopy
  • 1x Propeller disassemble tool
  • 1x Screw driver

 

Champions Fly Five33

Every Five33 product guarantees the highest quality on the market. When you purchase from us, you're getting parts that are the certified Choice of Champions worldwide.

Trusted quality, tested performance