Description
The TinyTrainer was developed for Evan “Headsup” Turner to practice flying big drones in his little backyard but became so much more. The flight characteristics of this drone, with the recommended build, result in a racing experience only found in the PRO FPV racing leagues.
Frame supports 16 x 16 stacks and 25 mm toothpick AIO boards. Supports both 9mm and 12mm mounting pattern motors.
Package includes:
- Qty 1 Tiny Trainer 2mm Carbon Frame
- Qty 1 TPU Parts Set (Cam Mount, Battery Tray, Fin, vtx mount)
- Qty 1 Smoked Black Poly-carbonate canopy
- Qty 8 6 mm M2 Button Head Hex Drive Screw
- Qty 4 16 mm M2 Button Head Hex Drive Screw
- Qty 8 M2 nylon Nuts
- Qty 4 16 mm M2 Standoffs
- Qty 8 4″ Nylon Cable Ties
Betaflight 4.1 +RPM filtering Diff >>> https://bit.ly/2VI864F
Kit includes all pictured tpu parts, but TPU part STL files can also be found here:
https://www.thingiverse.com/thing:4315912
Recommended Build
- Motors (1404 4600kv): These are larger heavier motors but found to be much less likely to burn in turtle mode etc, and have no problem spinning any prop. Recommended 4600 kv
- https://bit.ly/2Vj6FIn $16/motor
- VTX: Unify nano vtx (Linear antenna included)
- Camera: Runcam Racer Nano
- FC and ESC option #1: Beta FPV 2-4s AIO (bulletproof)
- FC and ESC option # 2: Flywoo Goku 13 amp AIO(has led preinstalled on board and mostly reliable)
Extra Options
- Batteries: GNB 520 mah 3S
- Mini Immortal T
- Crossfire Receiver
- Propeller: Gemfan option 3016
- https://bit.ly/3c4FS9h $2.59 per set
- Propeller: HQ option 3×1.5×3
- https://bit.ly/2ws0o4B $2.29 per set
- Micro Racelites
- https://bit.ly/2y1TYcM $2 dollar per piece. $8 dollar for full set
- Pico RGB LED’s
- https://bit.ly/3dZc2F0 $3 dollar
Kareem Johnson –
This one of the best3″ i ever had
Nosferbats (verified owner) –
Very nimble and yet stable with the right setup.
Kareem Johnson –
If don’t have one get 2
On my second one and it’s a beast on 4s