Spec7 (Pre-Order)

From: $69.99

Frames will begin shipping 3rd week of September

Spec7 Body Kit

$40.00

In stock

Spec7 Arm Kit

Spec7 TPU KIT

Spec7 Spare Arm

Category:

Description

This is our take on a beefy 7″ spec racing frame.

  • M5 Hardware! You’ll need a 3mm driver
  • T700 Arms
  • Lite or Long arm configuration
  • 16mm-19mm Motor Mounting
  • SSRS v1.8
  • 30.3×30.5 and 20×20 stack mounting
  • top plate has mounting holes for 20×20, 25.5×25.5, and 30.5×30.5
  • cavity between mid and bottom plate can be filled with weight
  • Arm pairs for each motor have a combined minimum cross sectional area of 90.01mm^2
  • Battery can be mounted side to side or front to back by rotating the bottom plate
  • all 3d printed part .stl’s available on printables.com

Long Configuration can be assembled in a Plus configuration by rotating the top plate, mid plate, and bottom plate 45 degrees

Lite arms are meant to make gates feel bigger and let you take closer lines, long arms are meant for clean air to all your props.

TPU Kit Include a variable cam mount and an SMA mount

Note: This design is part of the Loves 533 Open source project of which Five33 is the originator and designer.
link: https://drive.google.com/drive/folders/1HDgyVL_97C5v5k9YQhVeqSwP16wb6VVT?usp=sharing

Additional information

Arms

Lite, Longback

Spec7 Body Kit

Weight .1 lbs
Dimensions 5 × 7 × .6 in

Spec7 Arm Kit

Weight .05 lbs
Dimensions 5 × 6 × .5 in
Arm Length

Lite, Long

Spec7 TPU KIT

Weight .001 lbs
Dimensions 3 × 3 × 3 in

Spec7 Spare Arm

Weight 0.01 lbs
Dimensions 5 × 1 × .3 in
Arm Length

Lite, Long

Reviews

There are no reviews yet.

Be the first to review “Spec7 (Pre-Order)”

Your email address will not be published.