Sale!

HDzero V2 TinyTrainer (Ready To Fly)

From: $306.16

*pre order* Expected ship date January 20

Build to Order RX

TinyTrainer V2 Carbon and Hardware

$27.50

Out of stock

HDZERO NANO V2 HD FPV CAMERA BY RUNCAM

$49.99

In stock

HDZero Whoop Lite VTX

The HDZero Whoop Lite VTX is a digital HD 720p 60fps video transmitter capable of delivering up to 200mw on 5.8GHz. It is designed for racing

$64.99

In stock

HDZero MIPI Cable 80mm

$8.00

In stock

TinyTrainer V2 Canopy

$7.70

TinyTrainer V2 Battery Tray

$6.50

Five33 AXII 2 U.FL 5.8GHz Antenna w/ Locking U.FL

TUNERC POLY F405 2S-4S AIO FLIGHT CONTROLLER - 25.5X25.5

Our recommended AIO for tiny trainer V1 & V2
In stock and available as of January 13, for a limited time due to Chinese new year.

 

$63.49

Out of stock

TinyTurners | 1404 4533KV TinyTrainer Motors (Set of 4)

*on delay due to Chinese New Year* estimated arrival date Feb 9

Simply the best motor pairing for your TinyTrainer

$58.00

Out of stock

The ManazGCS Tiny Trainer LED Kit

Easy, simple, beautiful

Build Fee

Insufficient stock

Email when back in stock

Sold Out

Description

Tiny Trainer V2

Everything about the V1, just better.

The biggest complaints over the 2 years Tiny Trainers have been flying around the world are

  1. “I hate when I break the base plate in a hard crash. I have to swap over my entire build to a new plate, ending my day of flying.”
  2. ” I can’t stand that I have to unscrew 4 screws AND cut 4 Zip ties just to open up the body of the drone”
  3. “I’m tired of messing with TPU camera mounts, my printer never works, and I hate buying prints”
  4. “I prefer mounting batteries with a battery strap, my other micros even let me use rubber bands!”

Removable Arms

Tiny Trainer V2 comes standard with 3mm thick, ONE screw arm removal. Not only that, it uses steel M3 screws, so you never have to worry about stripping a screw when tightening your arms. Break an arm in the field? Take off your motor, pull the arm screw and bolt your new one on. You’re back in the air within 5 minutes.

Quick Fix Canopy Design

Taking the canopy off the Tiny Trainer V1 got old fast, now its as simple as loosening 2 screws. Once the back 2 screws are loosened (not removed) the entire body of the Tiny Trainer V2 unfolds, giving you access to 100 percent of the internals of the drone.  You’re ready to go fly, pull the hood back down, tighten up your screws, and rip! This drone is easier to work on than ever.

Integrated Injection Molded Camera Mount

No more dealing with 3D printed camera mounts, The Tiny Trainer V2 integrates a beautiful nano cam mount into the front of the Canopy. 2 mounting points available allowing a 30-60 degree mount and 5-25 degree mount! All while being fully integrated in the injection Molded Canopy.

Customizable Battery Solution

Armandos design allows for the use of the battery tray V2 (recommended for 550 mah 3s), Micro battery strap, and even rubber bands. You can use nearly ANY battery on a Tiny Trainer V2.

Limitations of Liability

Purchasers of this product expressly agree that in the event of any defects of a FlyFive33 LLC product, the only available remedy will be a refund not to exceed the actual amount paid by the purchaser for the product purchased.   FlyFive33 LLC shall not be liable for any special, incidental, or consequential damages that result from the use of, failure to complete safety checklist, or the inability to use, the materials sold through this site or the performance of the products, even if FlyFive33 LLC has been advised of the possibility of such damages. 

If you believe a product is defective, please notify our Customer Service department immediately by email at flyfive33@gmail.com. All claims relating to defective products are limited to refunds of the purchase price and will be honored only when made within 30 days of the date the product was shipped. Requests for refunds will not be honored where products are damaged or fail through misuse or in violation of any of the Returns and Refund Policy. 

Additional information

Build to Order RX

Weight .01 lbs
Dimensions 1 × 1 × 1 in
Receiver Type

Crossfire, Ghost, Tracer, ExpressLRS, No receiver (Plug n Play), DJI V2 Controller (O3 RTF's only)

HDZERO NANO V2 HD FPV CAMERA BY RUNCAM

Weight .01 lbs
Dimensions 1 × 1 × .5 in

HDZero MIPI Cable 80mm

Weight .001 lbs
Dimensions 3 × 2 × .1 in

Five33 AXII 2 U.FL 5.8GHz Antenna w/ Locking U.FL

Weight .005 lbs
Dimensions 3 × 2 × .5 in
Polarization

RHCP, LHCP

TUNERC POLY F405 2S-4S AIO FLIGHT CONTROLLER - 25.5X25.5

Weight .01 lbs
Dimensions 2 × 2 × .4 in

TinyTurners | 1404 4533KV TinyTrainer Motors (Set of 4)

Weight 0.1 lbs
Dimensions 2 × 3 × 1 in

The ManazGCS Tiny Trainer LED Kit

Weight .005 lbs
Dimensions 4 × 5 × .2 in

Build Fee

Weight .5 lbs
Dimensions 6 × 6 × 6 in

Reviews

There are no reviews yet.

Be the first to review “HDzero V2 TinyTrainer (Ready To Fly)”

Your email address will not be published. Required fields are marked *

Recently Viewed